m/a-com division of amp incorporated n north america: tel. (800) 366-2266, fax (800) 618-8883 n asia/paci?: tel. +85 2 2111 8088, fax +85 2 2111 8087 n europe: tel. +44 (1344) 869 595, fax +44 (1344) 300 020 www.macom.com amp and connecting at a higher level are trademarks. speci?ations subject to change without notice. 6-11 v3.00 two-, four-, & eight-way isolated power dividers wilkinson 2089 series output maximum frequency vswr isolation insertion unbalance input size, inches (mm) weight part no. range (max.) db (min.) loss amp. phase power* (ghz) db (max.) (db) (deg.) (watts) a b oz. g 2089-6201-00 1.0-2.0 1.25 20 0.25 0.2 4.0 2.0 2.0 (50.8) 0.5 (12.7) 1.5 43 2089-6202-00 2.0-4.0 1.35 20 0.25 0.2 4.0 2.0 2.0 (50.8) 0.5 (12.7) 1.5 43 2089-6203-00 4.0-8.0 1.35 20 0.3 0.2 6.0 2.0 1.38 (35) 0.4 (10.2) 1.2 35 2089-6204-00 8.0-12.4 1.60 20 0.4 0.25 6.0 2.0 1.38 (35) 0.4 (10.2) 1.2 35 2089-6205-00 12.4-18.0 1.70 17 0.6 0.25 6.0 3.0 1.38 (35) 0.4 (10.2) 1.2 35 2089-6206-00 0.5-2.0 1.30 20 0.4 0.2 4.0 4.0 2.8 (71.2) 1.4 (35.6) 2.0 57 2089-6207-00 2.0-8.0 1.50 18 0.4 0.25 8.0 4.0 2.25 (57.2) 0.5 (12.7) 1.3 37 2089-6208-00 2.0-18.0 1.60 17 1.0 0.25 8.0 10.0 2.25 (57.2) 0.5 (12.7) 1.3 37 2089-6209-00 4.0-18.0 1.60 17 0.6 0.25 8.0 4.0 1.63 (41.4) 0.5 (12.7) 1.3 37 2089-6210-00 7.0-18.0 1.70 17 0.6 0.25 8.0 3.0 1.38 (35) 0.4 (10.2) 1.2 35 two-way isolated power divider speci cations features excellent amplitude and phase balance high isolation between output ports low vswr, small size and light weight octave and multi-octave frequency coverage power: 10 watts input maximum with matched terminations meets mil-e-5400 environments description this series of two-way, in-phase stripline power dividers demonstrates excellent performance as well as small size and light weight. these octave and multi-octave power dividers have high isolation, low vswr and excellent amplitude and phase balance. their rugged construction meets mil-e-5400 environmental conditions, making them ideal for high performance microwave systems. * maximum input power with output loads of vswr 2.0:1. derate to 10% of listed value when arbitrarily terminated. l l l l l l all dimensions are .020, except mounting hole diameters ( .005) and mounting hole location ( .010). typical performance part no. 2089-6208-00 vswr
m/a-com division of amp incorporated n north america: tel. (800) 366-2266, fax (800) 618-8883 n asia/paci?: tel. +85 2 2111 8088, fax +85 2 2111 8087 n europe: tel. +44 (1344) 869 595, fax +44 (1344) 300 020 www.macom.com amp and connecting at a higher level are trademarks. speci?ations subject to change without notice. 6-12 two-, four-, & eight-way isolated power dividers 2089 series v3.00 four-way isolated power divider speci cations typical performance part no. 2089-6408-00 features octave and multi-octave frequency coverage low insertion loss excellent phase balance high isolation between output ports low vswr power: 20 watts maximum meets mil-e-5400 environments description these four-way in-phase power dividers combine excel- lent strip transmission line design techniques with small size and light weight and still achieve superb performance over wide multi-octave frequency ranges as well as over single octave bandwidths. these units may be used in reverse to combine in-phase signals applied to them. they are also available in a variety of ??way output ports as well as custom designed to your particular application. * maximum input power with output loads of vswr 2.0:1. derate to 10% of listed value when arbitrarily terminated. ** these units have four mounting holes symmetrically located as shown. l l l l l l l note: all dimensions are .020 except mounting hole diameters ( .005) and mounting hole location ( .010). output maximum frequency vswr isolation insertion unbalance input size, inches (mm) weight part no. range (max.) db (min.) loss amp. phase power* (ghz) db (max.) (db) (deg.) (watts) a b oz. g 2089-6401-00** 1.0-2.0 1.35 20 0.50 0.40 6 4.0 3.0 (76.2) 4.0 115 2089-6402-00 2.0-4.0 1.35 20 0.50 0.40 6 4.0 2.0 (50.8) 2.8 80 2089-6403-00 4.0-8.0 1.50 20 0.50 0.40 8 4.0 2.0 (50.8) 2.8 80 2089-6404-00 8.0-12.4 1.70 18 0.75 0.50 8 4.0 2.0 (50.8) 2.8 80 2089-6405-00 12.4-18.0 1.70 15 1.20 0.50 8 6.0 2.0 (50.8) 2.8 80 2089-6406-00** 0.5-2.0 1.45 20 0.70 0.40 6 4.0 2.92 (74.2) 4.0 115 2089-6407-00** 2.0-8.0 1.60 18 0.80 0.50 12 8.0 4.0 (102) 5.2 149 2089-6408-00 2.0-18.0 1.70 17 1.80 0.50 12 20.0 3.0 (76.2) 4.0 115 2089-6409-00 4.0-18.0 1.70 15 1.20 0.50 12 8.0 2.0 (50.8) 2.8 80 2089-6410-00 7.0-18.0 1.60 15 1.20 0.50 12 6.0 2.0 (50.8) 2.8 80 0.63 (15.9)
m/a-com division of amp incorporated n north america: tel. (800) 366-2266, fax (800) 618-8883 n asia/paci?: tel. +85 2 2111 8088, fax +85 2 2111 8087 n europe: tel. +44 (1344) 869 595, fax +44 (1344) 300 020 www.macom.com amp and connecting at a higher level are trademarks. speci?ations subject to change without notice. 6-13 two-, four-, & eight-way isolated power dividers 2089 series v3.00 output maximum frequency insertion unbalance input weight range vswr isolation loss amp phase power* size, inches (nom.) part no. (ghz) (max.) db (min.) db (max.) (db) (deg.) (watts) ab h i oz. 2089-6801-00 1.0-2.0 1.5:1 20 1.0 0.8 8 6.0 4.5 5.0 1.0 0.50 15 2089-6802-00 2.0-4.0 1.5:1 18 1.0 0.8 10 6.0 4.0 2.0 0.5 0.25 12 2089-6803-00 4.0-8.0 1.6:1 15 1.5 0.8 16 6.0 4.0 2.0 0.5 0.25 12 2089-6804-00 8.0-12.4 1.7:1 15 1.7 0.8 16 6.0 4.0 2.0 0.5 0.25 12 2089-6805-00 12.4-18.0 1.7:1 15 2.2 0.8 24 10.0 4.0 2.0 0.5 0.25 12 2089-6806-00 0.5-2.0 1.5:1 20 1.5 0.8 8 12.0 4.5 5.0 1.0 0.50 15 2089-6807-00 2.0-8.0 1.6:1 15 2.0 1.2 16 12.0 4.0 2.0 0.5 0.25 12 2089-6808-00 2.0-18.0 1.8:1 15 3.3 1.8 24 30.0 4.5 5.0 1.0 0.50 15 2089-6810-00 7.0-18.0 1.8:1 15 2.5 1.5 24 10.0 4.0 2.0 0.5 0.25 12 eight-way isolated power divider speci cations typical performance part no. 2089-6803-00 features octave and multi-octave frequency coverage excellent amplitude & phase balance low insertion loss low vswr meets mil-e-5400 environments description these new eight-way in-phase power dividers combine reliable strip transmission line design techniques with small size and light weight to achieve excellent performance over octave and multi-octave frequency ranges. they may also be used to combine in-phase signals applied at the outputs. their rugged construction meets stringent mil-e-5400 environmental conditions. sma female connectors are standard while other common connectors are available upon request. *maximum input power with output of vswr 2.0:1. derate to 10% of listed value when arbitrarily terminated. l l l l l 2.0:1 1.6:1 1.5:1 1.0:1 456 78 456 78 vswr frequency (ghz) 2.0 1.5 1.0 0.0 insertion loss (dbm) frequency (ghz) 10 20 30 456 78 isolation (db) frequency (ghz) speci?ations speci?ations speci?ations note: all dimensions are .020 except mounting hole diameters ( .005) and mounting hole location ( .010).
|
